www.vapourtec.co.uk

E-Series Reactors

 The Vapourtec E-Series can accept 1 or 2 reactors of various types, used in any configuration, and controls the temperature of each reaction step independently.   Scroll down to see the range of different reactors available.

 

 

The Vapourtec Forced Convection Heating and Cooling system

Vapourtec uses a unique method of controlling reactor temperature.

The reactor coil or column is housed inside an insulated  glass manifold, inside which heated air or cooled gas is circulated. 

Up to 2 of these can be clicked onto the E-Series.

Coil tube reactors, therefore, do not need to be wound tightly round any sort of former to achieve thermal conductivity, so as a result have little or no physical stress and are also kept at a uniform temperature with no hotspots.  This results in more precise control of reaction temperature and long reactor life.

Reactors can be switched in seconds with no tools.

 Reactor manifolds can be changed in seconds

The advantages of the Vapourtec temperature control system are many:

  • Temperature is measured at the reactor wall so control is extremely accurate.
  • Because of the low thermal inertia, the systems moves between temperature setpoints extremely quickly
  • For PFA reactors and glass columns, the reaction is fully visible at all times.  (With temperatures above 150oC, however, stainless steel or Hastelloy reactors are used)

 

 Download E-Series Brochure

Available Reactors

Standard tube reactor with PFA coil, mounted on E-Series

Standard PFA coil tube reactor

  • Ambient to 150oC
  • Standard available sizes 2,5,10ml 
  • Fully resistant to strong acids
  • Also accepts 20ml, 25ml stainless steel reactor coils
  • Also accepts 16ml PTFE coated stainless steel coils

Hih Temperature (250C) coil mounted on E-Series

High temperature coil tube reactor

  • Ambient to  +250oC
  • "Post Cooling" tube to return prodcts to safe temperature before re-entering PFA tubing
  • Standard available sizes 2,5,10ml
  • Material 316L 
  • Hastelloy® C also available (2ml, 4ml)
  • Outside of double insulated manifold safe to touch at all times

More details

Cooled coil reactor mounted on E-Series

 

Low temperature PFA coil tube reactor

  • PFA reactor tubing - resistant to strong acids
  • Ambient down to -70oC
  • Reagent  cooling prior to mixer.
  • Cooled mixer
  • Cooled post reaction quench zone
  • Standard available sizes 2,5,10ml
  • Can accept DualCoreTM reactor coils
  • Up to  2 can be used at same time, at different cooled temperatures
  • No icing up

More details
Standard heated column reactor mounted on E-Series

 Standard column reactor

  • Ambient  to  +150oC
  • Accepts standard Omnifit glass columns
  • 3 models for different Omnifit size ranges
  • No PEEK used
  • Reaction visible at all time
  • Precise temperature control

 
Cooled column reactor mounted on E-Series

 Cooled column reactor

  •  Ambient down to -40oC
  • Accepts standard Omnifit glass columns 6.6mm bore
  • No PEEK used
  • Reaction visible at all time
  • Precise temperature control

 

(Shown in use on an R-Series system)

Heated Mixer reactor

  • Two reagent inlets
  • Reagents reach target temperature before mixing
  • Internal mixer also held at target temperature
  • Can accept DualCoreTM reactor coils as well as standard PFA single reactor coils

And. like a standard tube reactor:

  • Ambient to 150oC
  • Standard available sizes 2,5,10ml 
  • Fully resistant to strong acids

More details here

Gas/Liquid reactor shown mounted on E-Series

Gas / Liquid Reactor

  •  Allows gas to be supplied to a reaction as it is proceeding (rather than pre-dissolved before the main reactor).  This permits hydrogenations at 1M, for example.
  • Proven for O2, CO, H2 , more gases currently being tested.
  • Reaction temperatures up to 150oC
  • Compatible with all existing Vapourtec systems
  • Simple gas management (pressure rather than mass flow control)
  • 2 reactors can be used in series for increased throughput

 

Click here for more details

  

  Copper Coil Reactor
  • Available for standard or high temperature coil manifolds
  • 2,5,10ml sizes
  • Suitable for copper catalysed chemistry

More details
  Watch this space

 Vapourtec are continuously innovating to add new features and capabilities to the E-Series and R-Series systems.  

If you'd like to be kept up to date with developments, signup for the Vapourtec Flow Chemistry newsletter. 

http://www.vapourtec.co.uk/newsletter/signup

 

 Download E-Series Brochure

 

FAQ

 

Q What is the maximum volume reactor available
A With PFA tube reactors, it is possible to have a total of 2 x 10ml = 20ml for a single reaction stage.  With stainless steel, however , it is possible to have a total of 2 x 25ml = 100ml.
   
Q Can I wind my own reactor coils
A No.  Vapourtec insist on fully testing all new reactors at elevated temperature and pressure as part of the manufacture process.  However, see next question.
   
Q How many cycles will a reactor last ?

A		 Vapourtec reactors are not consumable items.  They can be (and usually are) used for years without replacement.   Replacement reactors are only required if a reactor become irretrievably blocked by precipitation.